Tube Mill 76mm
I. The technical flow of the production line
{SteelTape}→Double-head un-coiler→Automatic Strip-head Cutter and welder→Accumulator→Forming section (Flattening unit +Main driving unit +Forming unit +Guide unit +High frequency induction welding unit +squeeze roller) + De-burr frame→Cooling unit→Sizing unit and straightener→Flying saw under computer-control→Run-out table
II. Basic conditions:
1. Production Capacity |
Round Pipe |
25mm - 76.2mm |
Square & Rectangular |
20*20 - 60*60(40*80)mm |
Wall Thickness |
0.8 - 4.0mm (Round Pipe);
0.8 - 3.0mm(Square Pipe) |
Speed |
Max.100mm |
Pipe Length |
4m – 12m |
2. Steel Strip Specification |
Material |
Low Carbon Steel, Q235, Q195 |
Coil I.D. |
460 - 510MM |
Coil O.D. |
Max. 1800mm |
Strip Width |
80mm – 240mm |
Strip Thickness |
0.8mm – 4.0mm |
Max. Weight |
3500kgs |
3. Electricity |
Dynamic power: |
380V, 3 phases, 50Hz (Depending On Local) |
Control Power: |
220V, one phase, 50 Hz |
4. Solid State High Frequency Welder: 250KW |
5. Electric installed capacity: Appro. 500KW |
6. Cooling Water |
Reservoir for High Frequency equipment: |
25m³, one set |
Reservoir for circulating cooling water: |
25m³, one set |
7. Compressed Air |
Pressure |
0.5 MPA |
Flow |
0.8m3/hour |
8. Line Speed: Max.100m/min |
9. Size of Whole Line: 65m X 6m (Length X Width) |
We always design and make each line according to each customer's specific requirements, so each customer can buy his own well-content line from us.
For more information, please send us inquiry.
Hebei Tubo Machinery Co.,Ltd
Contact :Andy
andy(at)erwtubemills.com
Web: www.pipemakingmachines.com
Mob/whatsapp:8615631120280